Time Clock Rounding Rules and the 7-Minute Rule

Last updated · By the DropFlick team

Many employers round clock-in and clock-out times to a set increment, such as the nearest 15 minutes. Here is how the common rounding rules work and how they change your totals.

The common increments

IncrementRounds toExample: punch at 8:53
5 minutes:00, :05, :10 …8:55
6 minutes (tenth of an hour):00, :06, :12 …8:54
10 minutes:00, :10, :20 …8:50
15 minutes (quarter hour):00, :15, :30, :459:00

The 7-minute rule

The “7-minute rule” is quarter-hour rounding to the nearest 15 minutes. If a punch is 1–7 minutes past a quarter hour, it rounds down; if it's 8–14 minutes past, it rounds up.

Is rounding allowed?

In the United States, the Department of Labor's regulations accept rounding to the nearest 5 minutes, tenth of an hour or quarter hour, as long as it averages out so employees are fully paid for the time they actually work over a period (29 CFR 785.48). A policy that always rounds in the employer's favour is not neutral. Some states and courts are stricter, and other countries have their own rules, so check locally.

How rounding changes a week

Example punches with 15-minute nearest rounding:

DayActualRoundedActual hoursRounded hours
Mon8:53 – 17:049:00 – 17:008:118:00
Tue9:06 – 17:099:00 – 17:158:038:15
Wed8:58 – 17:219:00 – 17:158:238:15

Over these three days, actual time is 24:37 and rounded time is 24:30. Over a long period, neutral rounding should roughly even out. To compare both for your own card, run it through the time card calculator once with “No rounding” and once with your employer's rule.

Neutral vs one-sided rounding

Rounding is meant to be neutral: sometimes it adds a few minutes, sometimes it takes them away. A policy that only ever rounds in one direction is different:

In the US, rounding is acceptable only if, averaged over time, it doesn't result in employees being paid for less than the time they actually work (29 CFR 785.48). Some states and courts look closely at rounding policies; outside the US, check your local rules and contract.

How much can rounding change a month?

Suppose you clock in on average 4 minutes before your shift and out 4 minutes after it, every day. With 15-minute nearest rounding, both punches round back to the scheduled times, so you're paid 8 minutes a day less than you were on site. Over 21 working days that's 168 minutes, or 2.8 hours. This is still fine if you weren't working during those minutes (for example arriving early and waiting), but if you were working, it should be paid.

How to check your own time card

  1. Keep your exact clock times for a few weeks.
  2. Enter them in the time card calculator with No rounding and note the total.
  3. Change Round each punch to your employer's rule and compare.
  4. If rounding consistently costs you time, raise it with payroll, using your records.

Rounding and decimal hours

6-minute rounding produces tidy tenths of an hour (8.1, 8.2…), and 15-minute rounding produces quarters (8.25, 8.5, 8.75). With no rounding you'll see values like 8.37. All of these are correct as long as minutes are divided by 60. See decimal hours explained.

Frequently asked questions

Is the 7-minute rule a law?

No. It's the common name for 15-minute nearest rounding, which US regulations permit when it's neutral over time. Employers don't have to round at all.

Can my employer round my break times?

Rounding usually applies to clock punches. Unpaid meal breaks should reflect the time you were actually relieved of duty; see paid vs unpaid breaks.